Bench-Flash DPF DEF EGR Delete Tuning | DPF/DEF DELETE PIPE

We are offering a bench-flash tune for the 2000+ 2.1L & 3.0L Mercedes Sprinter Vans equipped with the EDC17CP57 or EDC17CP46 PCM to disable related codes for off-road and race use.

Make sure you have this PCM part number before ordering.

Model Versions: 2000+ 316 CDI, 213 BlueTEC, 413 Bluetec, 413 Bluetec, 513 Bluetec, 516 Bluetech, 313 Bluetec & 2013-2017 219 Bluetec, 319 Bluetec, 519 Bluetec.

POWER LEVELS

• Stock: No power is added, and tunes run clean without much-added smoke
• Stage 1: 40HP added over stock power levels, tunes run clean without much-added smoke
• Stage 2: 50HP is added over stock power levels and some added smoke from the exhaust
• We will provide you shipping labels for sending ECM to us in Canada.

*Before ordering, you will need to check your PCM part number and verify that it is one of the following:
Bosch EDC16CP31
Bosch EDC17CP46
Bosch EDC17CP57
If you have a part number that is not on this list, do not order this tuner, please email us the part number of your PCM so we can verify compatibility.

To run a RACE tune all of the EGR/DPF/SCR/Adblue sensors must be unplugged and the Adblue/SCR PCM removed from the vehicle.

**DO NOT install the modified ECU with the Adblue module still plugged in or you will have error messages that cannot be removed**

*We cannot tune over an existing tune, if your PCM was previously tuned it will need to be reverted back to stock before a new tune can be used.*

The process requires you to remove your PCM/ECU (or have it professionally removed) and ship it to us. Before shipping it, use a permanent marker to write down your order # along with the model and model year of your vehicle. After we receive your PCM it will take 3-5 business days for us to receive it, inspect it, flash it, and ship it back. We will ship it back with express shipping and delivery time should be 2-3 business days. We recommend you ship the PCM express to have as little downtime for your truck as possible. We will provide you shipping labels or an address to send to, do not send to our office address that is listed.

Please email us with any questions you may have before purchasing as this purchase cannot be canceled or refunded.

Before removing your ECM take note of any maintenance or engine lights on the dash. You should have no errors before removing the ECM. If you have a DEF/DPF countdown issues prior to tuning, those should be cleared. Since those are transmitted by the SCR module it will stay in the cluster and an ECU tune unfortunately does not typically clear those codes. Be sure your codes are all cleared before you remove the ECM.

• 1- Clear all codes.
• 2- Turn the key to the off position.
• 3- Remove the negative cable from the battery.
• 4- Remove ECM.

*This is a special-order item and is exempt from returns/refunds*

Vehicle Fitment

2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Mercedes Sprinter 2500 & 3500 3.0L Diesel

Features

Description: It's finally time to start waking up these Sprinter Vans, and we're happy to say we've partnered with Flo-Pro to bring out this 3" Performance exhaust kit that still retains the factory tailpipes. This aftermarket setup is designed for RACE SETUP. Includes dual Twister resonators to give you a nice sound without disrupting the usability of your work or camper van.

RACE PIPES DESCRIPTION

• 3" aluminized steel piping
• Includes dual Twister resonators
• OE style hangers for easy installation
• Maximum flow for competition applications
• No bungs

*Some 2018 models use the 2019 "new design" turbo direct pipe and are not compatible with this exhaust system. If you have a 2018 model year, ensure you do not have the new design pictured on the left